Rugged Tablet PC's
NEXCOM MRC 2100, 8.4” Rugged Tablet PC’s
Rugged 8.4" Fan-less Tablet PC with Intel® Atom™ Processor/ Sunlight Readable Touch Screen/ Wi-Fi/ Bluetooth
- Supports Intel® Atom™ processor
- Intel® System Controller Hub US15W
- Integrated Wi-Fi 802.11/b/g/n and Bluetooth 2.0 + EDR
- Integrated Secure Data by Infi neon TPM 1.2 and Fingerprint Reader
- 1.3M Pixel Camera
- 4 ~ 8 Hours Long Lasting Battery Life
- Sealed to IP54
- 1.2M drop tested
- Optional 3.5G-GSM module or WIMAX
- Optional GPS
- Optional RFID/ Barcode Scanner
- Make an enquiry »
- Product Datasheet »
All our datasheets are PDF files you will need Acrobat Reader installed to view them.
| description | langauge | file |
|---|---|---|
| NEXCOM MRC 2100 Datasheet | English |
Specification NEXCOM MRC 2100, 8.4” Rugged Tablet PC’s
Specifications
- CPU Support
- Intel® Atom™ processor 900 MHz~1.86 GHz with 512 KB on-die L2 cache, 400MHz/533MHz FSB (0.6W~2W)
- Chipset
- Intel® System Controller Hub US15W (single chip integrated graphics and I/O controller)
- ITE8512E Embedded Controller
- Main Memory
- 1 x 200-pin DDR2 SO-DIMM socket, up to 2 GB SDRAM
- Storage
- 1 x 1.8" HDD (8mm ZIF) PATA interface
- 1 x Compact Flash Disk (Optional)
- Audio
- ALC888-VC2-GR HD Codec
- AC'97 Compatible
- 1 x external MIC-in and 1 x external Line-out
- Display
- Intel System Controller Hub US15W ultra low power controller integrated with 2D & 3D HW accelerator and high defi nition hardware video decode engine, UMA up to 256 MB
- Internal LVDS display port and SDVO expansion port
- Supports dual independent display (LVDS + SDVO)
- LVDS: supports IGD to communicate directly to an on-board fl at panel display,panel support 800x600 SVGA 18bit TFT LCD,
- Touch Screen: Analog Resistive 4 wire sunlight readable touch screen
- Ambient light sensor for LCD backlight control
- I/O
- 3 x External USB 2.0 port
- 1 x Bluetooth Module V 2.0 + EDR
- 1 x Finger Printer Sensor
- 1 x P-ATA ZIF Connector for 1.8” HDD or Compact Flash Disk
- 1 x MIC-in / Line-out
- 1 x 2.0 M CMOS Camera
- 1 x 19V DC power input
- 1 x 3.5G Module (optional)
- 1 x WiFi Module
- 1 x GPS Module (optional)
- 1 x 60-pin board to board connector for docking station
- 1 x RFID Module (optional)
- 1 x Barcode scanner (optional)
- 1, 2, or 4 x RS-232 / RS-485 serial ports (optional)
- I/O Interface-Front
- Power on/off Status (Blue LED on power switch)
- Battery Status (Green LED : Battery Discharged / Glows Orange: charging / fully charged : Battery LED turn off)
- Battery Low (Battery LED : Glows Green and Power LED Glows Blue)
- Wireless on/off LED (Orange LED on Wireless on/off switch ,Glows Orange is being accessed)
- Hard Disk Drive Status (Green LED: Glows Green HDD is being accessed)
- 6 x Programmable function keys
- Navigation key
- Power ON/OFF switch
- Wireless ON/OFF switch
- Expansion Slot
- Bus Interface: PCI, PCI-e SDVO and USB 2.0
- Docking Connector:
- 2 x USB 2.0
- 2 x RS-232
- 1 x VGA port
- 1 x Mini card socket
- DC-in 19V power input
- Power Input
- Power Input Voltage: DC 19V/3.42A
- Power Output: 65W (Max)
- Internal Battery: Rechargeable 3 Cell (3S1P) Lithium Ion Smart Battery
- Pack(2600 mAh @ 11.1V, 28.86W/hr) Over Charge Protection, Over Discharge
- Protection, Over Current and Output Short
- External Battery: Rechargeable 6-Cell (3S2P) Lithium Ion Smart Battery Pack
- (5200 mAh @ 11.1V, 57.72W/hr) Over Charge Protection, Over Discharge Protection, Over Current and Output Short
- Dimensions
- 280 x 208 x 43 mm
- Weight: 1.7 Kg
- Construction
- Plastic–upper and lower housing (ABS + PC)
- Color: Black (1 color for top cover and bottom Logo position - silk screen on surface)
- Environment
- Operating temperature: -20°C to 50°C
- Relative humidity: 5% to 95% (Non-condensing)
- Dust & Water Proof: IP54
- Drop: 4 feet (1.2m)
- Certifications
- CE approval
- FCC Class B



