The Trimble Yuma® rugged tablet computer is the computer you need to round out your outdoor computing solution. It has never been easier to conduct inspections, collect information, capture geo-tagged photos, communicate with headquarters, and transfer data in real time, all with the assurance that valuable information is protected by a tough magnesium alloy shell. Carry it, mount it on a tripod or pole, or mount in a vehicle–the Yuma goes where you go. You can use it to navigate to your next job, review work orders, revise documents and so much more. With the Windows 7 Professional operating system, this Windows tablet is equally useful in the office. It’s the ultimate one-computer solution.
Key features
- Intel Atom 1.6 GHz processor
- 32 GB solid state hard drive
- Integrated WiFi b/g
- Integrated Bluetooth 2.1
- Integrated GPS
- 2 integrated cameras
- ExpressCard slot
- SDIO slot
- Outdoor rugged design
- 7″ sunlight readable touch screen display
- Ultra light weight
Physical
- 5.5 in x 9 in x 2 in (14 cm x 23 cm x 5 cm)
- 2.6 lb (1.2 kg) including strap and standard batteries
- Magnesium Alloy Casing
- six keys (power, enter, directional and 3 user programmable function buttons)
- Sunlight readable color display
- 5 wire resistive touchscreen
- Rugged waterproof design
- Headphone/speaker mini-jack stereo
- Microphone/line-in mini-jack
- Outward facing autofocus 2 MP camera (video and photo)
- User facing 1.3 MP camera (video and photo)
- SDIO memory slot
- ExpressCard 34 mm slot
- Genuine Windows 7 Professional
- Intel Atom 1.6 GHz processor
- 1 GB DRAM
- 32 GB Solid State Hard Drive
- Standard Battery set (4 hours)
- Integrated Bluetooth 2.1 Class 2
- Integrated WiFi b/g (Cisco certification pending)
- Integrated GPS
- Water
- Immersed in 1 m of water for 30 minutes
- Water Jet 12.5 mm dia. @ 2.5 m–3 m, 100 Liter/min
- MIL-STD-810F, Method 512.4, Procedure I
- IEC-529, IP67
- Sand and dust
- 8 hours of operation with blowing talcum powder
- MIL-STD-810F, Method 510.3, Procedures I, II
- IEC-529, IP67
- Drop
- 26 drops from 4 ft (1.22 m) onto plywood over steel
- 6 additional drops at –22 °F (–30 °C)
- 6 additional drops at 140 °F (60 °C)
- MIL-STD-810F, Method 516.5, Procedure IV
- Vibration
- General Minimum Integrity and Loose Cargo test
- MIL-STD 810F, Method 514.5, Procedure I, II
- Operating Temperature
- –22 °F to 140 °F (–30 °C to 60 °C)
- MIL-STD 810F, Method 501.4, Procedure II
- MIL-STD 810F, Method 502.4, Procedure I, II, III
- Storage Temperature
- –40 °F to 158 °F (–40 °C to 70 °C)
- MIL-STD 810F, Method 501.4, Procedure I
- MIL-STD 810F, Method 502.4, Procedure I, II, III
- Temperature shock
- –22 °F/149 °F (–30 °C/+65 °C)
- MIL-STD-810F, Method 503.4, Procedure I
- Humidity
- 90%RH temp cycle 32 °F/158 °F (0 °C/+70 °C)
- MIL-STD-810F, Method 507.4
- Altitude
- 15,000 ft at 73 °F (22 °C) and 40,000 ft. at –22 °F (–30 °C)
- MIL-STD-810F, Method 500.4, Procedures I, II, III
